The EMS300 strain gauge sensor is designed to measure the torque of non-rotating objects. It is designed to be built between two shafts, has small dimensions and a robust construction. The sensor body is made of high-quality aluminum (range up to 50 Nm). Sensors with larger ranges are made of stainless steel.
Weight | 0,3 kg |
---|---|
Dimensions | 70 × ,55 cm |
Load direction | Non-rotating torque measure |
Rated Capacity (Fn) | 10Nm, 20Nm, 50Nm, 100Nm, 200Nm, 500Nm |
Rated capacity (Mn) | 10 / 20 / 50 Nm | 100 / 200 / 500 Nm |
---|---|---|
Overload - Safe - Ultimate - Permanent static load - Dynamic load |
130% Mn 150% Mn 75% Mn 50% Mn |
|
Nominal sensitivty (Cn) | 1.5 ± 0.03 mV/V | |
Zero balance | ± 0.03 mV/V | |
Max. error - Non-linearity - Hysteresis - Creep (30 min) |
0.25% Mn 0.25% Mn 0.1% Mn |
|
Temperature effect - On zero - On output |
0.1% Mn/10°C 0.1% Mn/10°C |
|
Bridge resistance - Input - Output |
390 ± 20 Ω 350 ± 10 Ω |
375 ± 20 Ω 350 ± 10 Ω |
Insulation impedance | > 500 MΩ | |
Excitation - Recommended - Maximal |
7 .. 10 V 15 V |
|
Temperature range - Compensated - Operating |
0°C .. +50°C -10°C .. +70°C |
|
Protection | IP54 | |
Cable - Type / Length |
LifYDY 4x0.14 / 2 m |
|
Sensor body material | Aluminium | Staineless Steel |
Sensor cover material | Aluminium |